Next-in-Thread Next Message

Question Possible erroneous manfid in config file? 

Forum: PCMCIA Network Adapter Issues
Date: 1999, Dec 13
From: Brian Mays brian

The Corega PCC-T Ehternet PCMCIA card (NE2000 clone) identifies its manfid as 0xc00f, 0x0000.

 $ cardctl ident 0
   product info: "corega K.K.", "corega Ether PCC-T"
   manfid: 0xc00f, 0x0000
   function: 6 (network)

But in pcmcia-cs 3.1.5, the config file config has another entry which also has manfid as 0xc00f, 0x0000.

 card "Allied Telesyn AT-2800 10/100 Fast Ethernet"
   manfid 0xc00f, 0x0000
   bind "tulip_cb"

Therefore, when a PCC-T Ethernet card is used, pcmcia-cs tried to install tulip_cb modules (instead of pcnet_cs), which results in errors.

Is the manfid for the AT-2800 correct or is something else wrong?

Next-in-Thread Next Message

Select this message: Possible erroneous manfid in config file?

Messages Inline: 1 All Outline: 1 2 All

1. None Well, one of them is wrong... by David Hinds, 2000, Jan 14

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]