[ Next-in-Thread ]  [ Next Message ] 

Question: Possible erroneous manfid in config file? 

Forum: PCMCIA Network Adapter Issues
Date: 1999, Dec 13
From: Brian Mays brian

The Corega PCC-T Ehternet PCMCIA card (NE2000 clone) identifies its manfid as 0xc00f, 0x0000. 

 $ cardctl ident 0
   product info: "corega K.K.", "corega Ether PCC-T"
   manfid: 0xc00f, 0x0000
   function: 6 (network)

But in pcmcia-cs 3.1.5, the config file config has another entry which also has manfid as 0xc00f, 0x0000. 

 card "Allied Telesyn AT-2800 10/100 Fast Ethernet"
   manfid 0xc00f, 0x0000
   bind "tulip_cb"

Therefore, when a PCC-T Ethernet card is used, pcmcia-cs tried to install tulip_cb modules (instead of pcnet_cs), which results in errors.

Is the manfid for the AT-2800 correct or is something else wrong?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. Well, one of them is wrong... by David Hinds, 2000, Jan 14

[ Add Message ]  to: "Possible erroneous manfid in config file?"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]