It is not a supported card, but... 

Forum: PCMCIA Network Adapter Issues
Re: Question: Billionton LNA-100B (Markus Troebensberger)
Date: 1999, Nov 04
From: David Hinds <dhinds@pcmcia.sourceforge.org>

The obvious question would be, have you tried adding an entry to /etc/pcmcia/config, to see if any of the existing drivers already work? (the chance that it is actually a new design and needs a new driver to be written from scratch are roughly... zero) -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Sad: I have testet ... Re: It is not a supported card, but... (David Hinds) Date: 1999, Nov 05 From: Markus Troebensberger troebs

I have testet all drivers that i have seen at the other entrys in /etc/pcmcia/config. 3c589_cs, fmvj18x_cs and 3c574_cs: At boot time these drivers show a MAC (Hardwareaddress) of: 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF This is not a correct address. Is'nt it ? (two high beeps when putting the card into the slot) The other drivers pcnet_cs, xirc2ps_cs, smc91c92_cs and nmclan_cs: They beep once high and once low. What can I do ? Markus

[ Add Message ]  to: "It is not a supported card, but..."

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]