[ Next-in-Thread ]  [ Next Message ] 

Sad: I have testet ... 

Forum: PCMCIA Network Adapter Issues
Re: Question: Billionton LNA-100B (Markus Troebensberger)
Re: It is not a supported card, but... (David Hinds)
Date: 1999, Nov 05
From: Markus Troebensberger troebs

I have testet all drivers that i have seen at the other entrys in /etc/pcmcia/config.

3c589_cs, fmvj18x_cs and 3c574_cs:

At boot time these drivers show a MAC (Hardwareaddress) of: 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF This is not a correct address. Is'nt it ?

(two high beeps when putting the card into the slot)

The other drivers pcnet_cs, xirc2ps_cs, smc91c92_cs and nmclan_cs:

They beep once high and once low.

What can I do ?

Markus

[ Next-in-Thread ]  [ Next Message ] 

Select this message: I have testet ...

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]