Next-in-Thread Next Message

Question NetGear FA510 ethernet card not recognized 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 05
From: Michael Bletzinger mbletzin

A coworker and I have the same thinkpad 600E and netgear card. He is running 2.2.13 kernel and pcmcia distribution 3.1.0. I am running kernel 2.2.12 with pcmcia 3.1.8. His configuration works mine doesn't.

When he does a "cardctl ident" the following is listed:

  product info: "NETGEAR", "FA510", "Fast Ethernet CardBus Card", "1.00"
  manfid: 0x9513, 0x0081
  function: 6 (network)

On my conputer the command list "no product info found". The card was identified once while I was hot swapping cards.

        Thanks in advance

Next-in-Thread Next Message

Select this message: NetGear FA510 ethernet card not recognized

Messages Inline: 1 All Outline: 1 2 All

1. None The usual response: check your system log by David Hinds, 2000, Jan 06
(_ Feedback Here are the logs by Michael Bletzinger, 2000, Jan 06
(_ Ok Changing the address worked by Michael Bletzinger, 2000, Jan 10

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]