Next-in-Thread Next Message

Question Problems with Accton EN2220 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 09
From: Volker Wendt <wendt@nid.de>

Hi,

I tried to use an Accton EN2220 CardBus Fast Ethernet Card. I am using pcmcia-cs.3.1.8 on Linux 2.2.13. Everything seems to work well: The card is detected correctly and all modules are loaded. But it does'nt work. The log says

Jan  9 15:06:27 jc kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
Jan  9 15:06:27 jc cardmgr[1231]: initializing socket 0
Jan  9 15:06:27 jc kernel: ROM image dump:
Jan  9 15:06:27 jc kernel:   image 0: 0x000000-0x0001ff, signature PCIR
Jan  9 15:06:27 jc cardmgr[1231]: socket 0: Accton EN2220 Fast Ethernet
Jan  9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Jan  9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o'
Jan  9 15:06:27 jc kernel: cs: cb_config(bus 32)
Jan  9 15:06:27 jc kernel:   fn 0 bar 1: io 0x400-0x47f
Jan  9 15:06:27 jc kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Jan  9 15:06:27 jc kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Jan  9 15:06:27 jc kernel: cs: cb_enable(bus 32)
Jan  9 15:06:27 jc kernel:   bridge io map 0 (flags 0x21): 0x400-0x47f
Jan  9 15:06:27 jc kernel:   bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff
Jan  9 15:06:27 jc kernel: tulip_attach(bus 32, function 0)
Jan  9 15:06:27 jc kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Jan  9 15:06:27 jc kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, FC:00:FC:00:00:00, IRQ 10.
Jan  9 15:06:27 jc cardmgr[1231]: executing: './network start eth0'
Jan  9 15:06:41 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:41 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:06:47 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:47 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:06:53 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:53 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:07:02 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:02 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:08 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:08 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:14 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:14 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:23 jc kernel: eth0: Tx hung, 18 vs. 9.
Jan  9 15:07:23 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...

Thanks for any help,
  Volker

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Need more messages by David Hinds, 2000, Jan 09
2. None The usual mantra: more system log messages, please by David Hinds, 2000, Jan 10
3. None might be tulip problem? by J. Schmid, 2000, Jan 11

Add Message to: "Problems with Accton EN2220"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10