Next-in-Thread Next Message

Question Problems with Accton EN2220 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 09
From: Volker Wendt <wendt@nid.de>

Hi,

I tried to use an Accton EN2220 CardBus Fast Ethernet Card. I am using pcmcia-cs.3.1.8 on Linux 2.2.13. Everything seems to work well: The card is detected correctly and all modules are loaded. But it does'nt work. The log says

Jan  9 15:06:27 jc kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
Jan  9 15:06:27 jc cardmgr[1231]: initializing socket 0
Jan  9 15:06:27 jc kernel: ROM image dump:
Jan  9 15:06:27 jc kernel:   image 0: 0x000000-0x0001ff, signature PCIR
Jan  9 15:06:27 jc cardmgr[1231]: socket 0: Accton EN2220 Fast Ethernet
Jan  9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Jan  9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o'
Jan  9 15:06:27 jc kernel: cs: cb_config(bus 32)
Jan  9 15:06:27 jc kernel:   fn 0 bar 1: io 0x400-0x47f
Jan  9 15:06:27 jc kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Jan  9 15:06:27 jc kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Jan  9 15:06:27 jc kernel: cs: cb_enable(bus 32)
Jan  9 15:06:27 jc kernel:   bridge io map 0 (flags 0x21): 0x400-0x47f
Jan  9 15:06:27 jc kernel:   bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff
Jan  9 15:06:27 jc kernel: tulip_attach(bus 32, function 0)
Jan  9 15:06:27 jc kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Jan  9 15:06:27 jc kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, FC:00:FC:00:00:00, IRQ 10.
Jan  9 15:06:27 jc cardmgr[1231]: executing: './network start eth0'
Jan  9 15:06:41 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:41 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:06:47 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:47 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:06:53 jc kernel: eth0: Tx hung, 12 vs. 9.
Jan  9 15:06:53 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...
Jan  9 15:07:02 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:02 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:08 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:08 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:14 jc kernel: eth0: Tx hung, 15 vs. 9.
Jan  9 15:07:14 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting...
Jan  9 15:07:23 jc kernel: eth0: Tx hung, 18 vs. 9.
Jan  9 15:07:23 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting...

Thanks for any help,
  Volker

Next-in-Thread Next Message

Select this message: Problems with Accton EN2220

Messages Inline: 1 All Outline: 1 2 All

1. None Need more messages by David Hinds, 2000, Jan 09
2. None The usual mantra: more system log messages, please by David Hinds, 2000, Jan 10
3. None might be tulip problem? by J. Schmid, 2000, Jan 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]