Question: Problems with Accton EN2220 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 09
From: Volker Wendt <wendt@nid.de>

Hi, I tried to use an Accton EN2220 CardBus Fast Ethernet Card. I am using pcmcia-cs.3.1.8 on Linux 2.2.13. Everything seems to work well: The card is detected correctly and all modules are loaded. But it does'nt work. The log says Jan 9 15:06:27 jc kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 Jan 9 15:06:27 jc cardmgr[1231]: initializing socket 0 Jan 9 15:06:27 jc kernel: ROM image dump: Jan 9 15:06:27 jc kernel: image 0: 0x000000-0x0001ff, signature PCIR Jan 9 15:06:27 jc cardmgr[1231]: socket 0: Accton EN2220 Fast Ethernet Jan 9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o' Jan 9 15:06:27 jc cardmgr[1231]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o' Jan 9 15:06:27 jc kernel: cs: cb_config(bus 32) Jan 9 15:06:27 jc kernel: fn 0 bar 1: io 0x400-0x47f Jan 9 15:06:27 jc kernel: fn 0 bar 2: mem 0x600c0000-0x600c03ff Jan 9 15:06:27 jc kernel: fn 0 rom: mem 0x60080000-0x600bffff Jan 9 15:06:27 jc kernel: cs: cb_enable(bus 32) Jan 9 15:06:27 jc kernel: bridge io map 0 (flags 0x21): 0x400-0x47f Jan 9 15:06:27 jc kernel: bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff Jan 9 15:06:27 jc kernel: tulip_attach(bus 32, function 0) Jan 9 15:06:27 jc kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Jan 9 15:06:27 jc kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, FC:00:FC:00:00:00, IRQ 10. Jan 9 15:06:27 jc cardmgr[1231]: executing: './network start eth0' Jan 9 15:06:41 jc kernel: eth0: Tx hung, 12 vs. 9. Jan 9 15:06:41 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting... Jan 9 15:06:47 jc kernel: eth0: Tx hung, 12 vs. 9. Jan 9 15:06:47 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting... Jan 9 15:06:53 jc kernel: eth0: Tx hung, 12 vs. 9. Jan 9 15:06:53 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting... Jan 9 15:07:02 jc kernel: eth0: Tx hung, 15 vs. 9. Jan 9 15:07:02 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting... Jan 9 15:07:08 jc kernel: eth0: Tx hung, 15 vs. 9. Jan 9 15:07:08 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting... Jan 9 15:07:14 jc kernel: eth0: Tx hung, 15 vs. 9. Jan 9 15:07:14 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbff7f 8ff10008, resetting... Jan 9 15:07:23 jc kernel: eth0: Tx hung, 18 vs. 9. Jan 9 15:07:23 jc kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff10008, resetting... Thanks for any help, Volker

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Need more messages Re: Question: Problems with Accton EN2220 (Volker Wendt) Date: 2000, Jan 09 From: David Hinds <dhinds@pcmcia.sourceforge.org>

The interesting part of the log is the part before where yours starts. And what kind of laptop is this? -- Dave

The usual mantra: more system log messages, please Re: Question: Problems with Accton EN2220 (Volker Wendt) Date: 2000, Jan 10 From: David Hinds <dhinds@pcmcia.sourceforge.org>

The startup messages from the PCMCIA modules (the PCIC probe results, etc) would be most useful. It would also be useful to say what kind of laptop this is. -- Dave

might be tulip problem? Re: Question: Problems with Accton EN2220 (Volker Wendt) Date: 2000, Jan 11 From: J. Schmid jds

This line doesn't look like the tulip driver got a good address (FC:00:FC:00:00:00 seems to have too many 0s): Jan 9 15:06:27 jc kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, FC:00:FC:00:00:00, IRQ 10. I had a similar problem with a genius MF3000. My card is usable with a newer tulip driver (but not the newest :-() as posted under "kludge for partial functionality of genius MF3000".

[ Add Message ]  to: "Problems with Accton EN2220"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]