might be tulip problem?

Forum: PCMCIA Network Adapter Issues
Re: Question: Problems with Accton EN2220 (Volker Wendt)
Date: 2000, Jan 11
From: J. Schmid jds

This line doesn't look like the tulip driver got a good address (FC:00:FC:00:00:00 seems to have too many 0s):

Jan 9 15:06:27 jc kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, FC:00:FC:00:00:00, IRQ 10.

I had a similar problem with a genius MF3000. My card is usable with a newer tulip driver (but not the newest :-() as posted under "kludge for partial functionality of genius MF3000".

[ Next-in-Thread ] [ Next Message ]

Select this message: might be tulip problem?

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]