[ Next-in-Thread ]  [ Next Message ] 

Ok: New hw_info line for PCMCIA Technology OEM NE2000 Compatible 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 10
From: sampo

I don't know where to report these for adding to autodetection list so I try here. I figured out this stuff using the instructions for configuring a new NE2000 clone.

To pcnet_cs.c following hw_info struct: 

 { /* PCMCIA Technology OEM 10/100 */ 0x01c8, 0xa0, 0x0c, 0 },

To config 

 card "PCMCIA Technology OEM 10/100 NE2000 Compatible Ethernet"
   manfid 0x8a01, 0xc1ab
   bind "pcnet_cs"

Basically this card is a noname OEM card. Mine does not have any indication of manufacurer (I found the string "PCMCIA Technology, Inc." by looking into cards memory space) or country of origin. I bought mine at Portugal on Sept 1999.

On the reverse side following markings were found: 

 10/100 Mbps Ethernet PC Card
 P/N: KEN0100-A
 VER: XA
 S/N: 920I07430004
 16 5V

--Sampo

[ Next-in-Thread ]  [ Next Message ] 

Select this message: New hw_info line for PCMCIA Technology OEM NE2000 Compatible

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]