Hello,
I have a Sony Vaio 505V and recently bought an OvisLink
LFS PCM 32 cardbus card, since it is listed in
SUPPORTED.CARDS.
Needless to say, my first try was rather unsuccessfull :-(
linux-2.2.14, pcmcia-cs-3.1.8.
Neither transmitting nor receiving works. The RX counters
ifconfig reports just stay zero, likewise the TX counters.
Only TX errors is incremented now and then. The card is
attached to a 10Mbit/s hub.
Linux PCMCIA Card Services 3.1.8
kernel build: 2.2.14 #3 Tue Jan 18 15:46:42 UTC 2000
options: [pci] [cardbus] [apm]
Intel PCIC probe:
Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket
host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
ISA irqs (default) = 3,4,7,10,11,12,15 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
cs: cb_config(bus 32)
fn 0 bar 1: io 0x400-0x47f
fn 0 bar 2: mem 0x600c0000-0x600c03ff
fn 0 rom: mem 0x60080000-0x600bffff
cs: cb_enable(bus 32)
bridge io map 0 (flags 0x21): 0x400-0x47f
bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff
tulip_attach(bus 32, function 0)
tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Digital DS21143 Tulip rev 65 at 0x400, 00:E0:98:12:F9:9D, IRQ 10.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1.
eth0: Tx hung, 11 vs. 0.
eth0: Tx hung, 14 vs. 0.
(now executing cardctl eject)
tulip_detach(eth0)
cs: cb_disable(bus 32)
cs: cb_release(bus 32)
cs: cb_free(bus 32)
Any idea?
-Klaus
|
Messages
Maybe try the latest beta?
| |
| |
|