[ Next-in-Thread ]  [ Next Message ] 

Sad: Vaio 505V + OvisLink LFS PCM32 doesn't work 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 18
From: Klaus Kudielka klaus.kudielka 

Hello,

I have a Sony Vaio 505V and recently bought an OvisLink
LFS PCM 32 cardbus card, since it is listed in
SUPPORTED.CARDS.

Needless to say, my first try was rather unsuccessfull :-(
linux-2.2.14, pcmcia-cs-3.1.8.
Neither transmitting nor receiving works. The RX counters
ifconfig reports just stay zero, likewise the TX counters.
Only TX errors is incremented now and then. The card is
attached to a 10Mbit/s hub.

Linux PCMCIA Card Services 3.1.8
  kernel build: 2.2.14 #3 Tue Jan 18 15:46:42 UTC 2000
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: 
  Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket
    host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
    ISA irqs (default) = 3,4,7,10,11,12,15 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
cs: cb_config(bus 32)
  fn 0 bar 1: io 0x400-0x47f
  fn 0 bar 2: mem 0x600c0000-0x600c03ff
  fn 0 rom: mem 0x60080000-0x600bffff
cs: cb_enable(bus 32)
  bridge io map 0 (flags 0x21): 0x400-0x47f
  bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff
tulip_attach(bus 32, function 0)
tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Digital DS21143 Tulip rev 65 at 0x400, 00:E0:98:12:F9:9D, IRQ 10.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.
eth0: Tx hung, 11 vs. 0.
eth0: Tx hung, 14 vs. 0.

(now executing cardctl eject)

tulip_detach(eth0)
cs: cb_disable(bus 32)
cs: cb_release(bus 32)
cs: cb_free(bus 32)

Any idea?

-Klaus

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Vaio 505V + OvisLink LFS PCM32 doesn't work

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Maybe try the latest beta? by David Hinds, 2000, Jan 21
(_ Sad: 18-Jan-00 doesn't help. by Klaus Kudielka, 2000, Jan 21
(_ Ok: 3.1.10 works by Klaus Kudielka, 2000, Feb 07

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]