18-Jan-00 doesn't help.

Sad: 18-Jan-00 doesn't help.

Forum: PCMCIA Network Adapter Issues
Re: Sad: Vaio 505V + OvisLink LFS PCM32 doesn't work (Klaus Kudielka)
Re: Maybe try the latest beta? (David Hinds)
Date: 2000, Jan 21
From: Klaus Kudielka klaus.kudielka

Here are the messages, with options tulip_cb debug=3: Linux PCMCIA Card Services 3.1.9 kernel build: 2.2.14 #3 Tue Jan 18 15:46:42 UTC 2000 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfdf80 Intel PCIC probe: Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34] ISA irqs (default) = 3,4,7,10,11,15 polling interval = 1000 ms cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x388-0x38f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 cs: cb_config(bus 32) fn 0 bar 1: io 0x400-0x47f fn 0 bar 2: mem 0x600c0000-0x600c03ff fn 0 rom: mem 0x60080000-0x600bffff cs: cb_enable(bus 32) bridge io map 0 (flags 0x21): 0x400-0x47f bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff tulip_reap() tulip_attach(bus 32, function 0) tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) eth0: Digital DS21143 Tulip rev 65 at 0x400, 00:E0:98:12:F9:9D, IRQ 10. eth0: EEPROM default media type Autosense. eth0: MII interface PHY 0, setup/reset sequences 0/0 long, capabilities e0 78. eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. eth0: Advertising 01e1 on PHY 0 (0). eth0: Using media type MII, CSR12 is c6. eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1. eth0: tulip_open() irq 10. eth0: Advertising 01e1 on PHY 0 (0). eth0: Using media type MII, CSR12 is c6. eth0: Using MII transceiver 0, status 7809. eth0: Done tulip_open(), CSR0 f8a08000, CSR5 f0120000 CSR6 b20e2002. eth0: 21143 negotiation status 000000c6, MII. eth0: MII status 7829, Link partner report 0021. eth0: Tx hung, 11 vs. 0. eth0: Transmit timeout using MII device.

[ Next-in-Thread ] [ Next Message ]

Select this message: 18-Jan-00 doesn't help.

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. Ok: 3.1.10 works by Klaus Kudielka, 2000, Feb 07

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]