Next-in-Thread Next Message

Question Problems with Kingmax KEN0100-DF Ethernet card 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jan 20
From: Albio alby

My Kingmax KEN0100-DF Ethernet card is recognized by cardmngr using the module tulip_cb, but I can't access the network (with ping for example).

I controlled several times the network configuration: IP address, DNS, Gateway etc.

Giving ifconfig the eth0 is up; the ip number and netmask are correctly setted.

Can someone help me? Thanks

Next-in-Thread Next Message

Select this message: Problems with Kingmax KEN0100-DF Ethernet card

Messages Inline: 1 All Outline: 1 2 All

1. None Again... system log messages?? by David Hinds, 2000, Jan 20
(_ Note Sys Log messages by Albio, 2000, Jan 21
(_ None Driver upgrade? by David Hinds, 2000, Jan 22
(_ None It doesn't work by Albio, 2000, Jan 22
(_ None Re: It doesn't work by David Hinds, 2000, Jan 24
(_ None It's doesn't work again. by Albio, 2000, Jan 28
(_ Ok It works !!!! by Albio, 2000, Feb 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]