[ Next-in-Thread ]  [ Next Message ] 

Driver upgrade? 

Forum: PCMCIA Network Adapter Issues
Re: Question: Problems with Kingmax KEN0100-DF Ethernet card (Albio)
Re: Again... system log messages?? (David Hinds)
Re: Note: Sys Log messages (Albio)
Date: 2000, Jan 22
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

You should probably try upgrading your PCMCIA drivers.  It looks like
maybe you've already tried to do this??  (your cardmgr is version
3.0.14, but your kernel modules are version 3.0.9)

Newer driver packages (3.0.14 and later) have a newer version of the
tulip_cb module.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

It doesn't work

Re: Driver upgrade? (David Hinds)
Date: 2000, Jan 22
From: Albio alby

I istalled the package pcmcia-cs3.1.6.tar.gz

The card is recognized again, but I can't ping anywhere...

There is some other solution?

Thanks

Re: It doesn't work

Re: It doesn't work (Albio)
Date: 2000, Jan 24
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

It would again be useful to post system log messages.

Why did you pick 3.1.6?

It could be an interrupt conflict.  Try excluding interrupts in
/etc/pcmcia/config.opts, starting with irq 3, and see if that helps.

-- Dave

It's doesn't work again.

Re: Re: It doesn't work (David Hinds)
Date: 2000, Jan 28
From: Albio alby

> why did you pick 3.1.6?

Which version have I to pick ? 

> It could be an interrupts. It could be an interrupt >conflict. Try excluding interrupts in >/etc/pcmcia/config.opts, 
> starting with irq 3, and see if that helps.

I tried to exclude irq 3 and then 9 but it doesn't work ...

A.

Ok: It works !!!!

Re: It's doesn't work again. (Albio)
Date: 2000, Feb 05
From: Albio alby

My CardBus Kingmax 10/100 KEN0100-DF works with pcmcia-cs-3.1.10 !!!!

Thank you Dave

Albio

Driver upgrade?

[ Add Message ]  to: "Driver upgrade?"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]