Next-in-Thread Next Message

None Resource conflict? 

Forum: PCMCIA Network Adapter Issues
Re: Question Socket EA System Hang (Robert Sanderson)
Date: 2000, Jan 21
From: David Hinds <dhinds@pcmcia.sourceforge.org>

My first guess would be that this is either an IO port or interrupt
conflict.

Since you've already built 3.1.8, I'd try re-building it with "PnP
BIOS support" switched on, and see if that makes a difference: this
should make PCMCIA do a better job of avoiding resource conflicts.

Or, you can try excluding port 0x300-0x31f and irq 3 in
/etc/pcmcia/config.opts.

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 3 All

More Resource Conflict, Socket EA

Re: None Resource conflict? (David Hinds)
Date: 2000, Jan 24
From: Robert Sanderson azaroth

> Or, you can try excluding port 0x300-0x31f and irq 3 in
> /etc/pcmcia/config.opts.

I had tried excluding IRQ 3 for that reason before, but not the port. Unfortunately the same results happen with the port excluded as well. :(

In the docs it says to set ifport. The card reports as 'auto' in the syslog, but trying to set it to 10baseT results in the same hang as touching the card any other way. Is this significant perhaps?

Or any other suggestions?

Many thanks,

Rob Sanderson

1. More Socket EA hang, by Robert Sanderson, 2000, Jan 25
Resource conflict?


Add Message to: "Resource conflict?"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10