[ Next-in-Thread ]  [ Next Message ] 

More: Resource Conflict, Socket EA 

Forum: PCMCIA Network Adapter Issues
Re: Question: Socket EA System Hang (Robert Sanderson)
Re: Resource conflict? (David Hinds)
Date: 2000, Jan 24
From: Robert Sanderson azaroth 

> Or, you can try excluding port 0x300-0x31f and irq 3 in
> /etc/pcmcia/config.opts.

I had tried excluding IRQ 3 for that reason before, but not the port. Unfortunately the same results happen with the port excluded as well. :(

In the docs it says to set ifport. The card reports as 'auto' in the syslog, but trying to set it to 10baseT results in the same hang as touching the card any other way. Is this significant perhaps?

Or any other suggestions?

Many thanks,

Rob Sanderson

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

More: Socket EA hang,

Re: More: Resource Conflict, Socket EA (Robert Sanderson)
Date: 2000, Jan 25
From: Robert Sanderson azaroth 

Here, as requested, are the pcmcia boot time messages.

kernel:  Linux PCMCIA Card Services 3.1.8
kernel:    kernel build: 2.2.14 #1 Thu Jan 20 14:27:00 GMT
kernel:    options [pci] [cardbus] [apm]
kernel:  Intel PCIC probe:
kernel:    TI 1225 PCI-to-CardBus at bus 0 slot 3, mem 0x68000000, 2 sockets
kernel:   host opts [0]: [ring] [serial pci & irq] [no pci irq] [lat 32/176] [bus 32/34]
kernel:   host opts [1]: [ring] [serial pci & irq] [no pci irq] [lat 32/176] [bus 35/37]
pcmcia:  starting PCMCIA services:
pcmcia:  cardmgr.
rc:  starting pcmcia succeeded
cardmgr[332]: starting, version is 3.1.8
cardmgr[332]: watching 2 sockets
kernel: cs: IO port probe 0x1000-0x17ff: clean
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7


Thanks,

Rob
Resource Conflict, Socket EA

[ Add Message ]  to: "Resource Conflict, Socket EA"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]