[ Next-in-Thread ]  [ Next Message ] 

More: Resource Conflict, Socket EA 

Forum: PCMCIA Network Adapter Issues
Re: Question: Socket EA System Hang (Robert Sanderson)
Re: Resource conflict? (David Hinds)
Date: 2000, Jan 24
From: Robert Sanderson azaroth 

> Or, you can try excluding port 0x300-0x31f and irq 3 in
> /etc/pcmcia/config.opts.

I had tried excluding IRQ 3 for that reason before, but not the port. Unfortunately the same results happen with the port excluded as well. :(

In the docs it says to set ifport. The card reports as 'auto' in the syslog, but trying to set it to 10baseT results in the same hang as touching the card any other way. Is this significant perhaps?

Or any other suggestions?

Many thanks,

Rob Sanderson

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Resource Conflict, Socket EA

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More: Socket EA hang, by Robert Sanderson, 2000, Jan 25

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]