Next-in-Thread Next Message

Question Problems starting dhclient 

Forum: PCMCIA Network Adapter Issues
Date: 1999, Dec 05
From: Stefan Hahne loki

I have a Toshiba Satellite 2550CDT, Kernel 2.2.13 and pcmcia-cs-3.1.5.
Compiling and installation works fine and ifconfig
shows:
	"eth0 Link encap:Ethernet	HWAddr 00:50:22:20:3F:A9
	 unspec addr:[NONE SET] Bcast:[NONE SET] MASK:[NONE SET]
	 ..."
but the dhcp-client exit with "dhclient: eth0: not found" at
boot time and whenever I insert the card!!

Any suggestions?
Thanks in advance!

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 2 3 All

None Check your system log, etc

Re: Question Problems starting dhclient (Stefan Hahne)
Date: 2000, Jan 05
From: David Hinds <dhinds@pcmcia.sourceforge.org>

My first suggestion would be to try to verify if the card works
without DHCP, then try experimenting with DHCP.  What happens if you
invoke dhclient by hand, after inserting the card?

Also, you didn't mention what kind of card this is.  It also might be
useful to check your system log for error messages.

-- Dave
Problems starting dhclient


Add Message to: "Problems starting dhclient"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10