Next-in-Thread Next Message

Ok OK, I guess next time I will just ignore proc/interruptsI 

Forum: PCMCIA Network Adapter Issues
Re: Question Dual PCMCIA NIC system (Linksys plus NDC ) time outs and lost interrupts (Dale moberg)
Re: None Sounds like a classic interrupt conflict (David Hinds)
Date: 2000, Jan 30
From: Dale moberg dmoberg

I did see that the case matched the HOWTO info, but I did not see any interrupt conflict in /proc/interrupt. (I now see I was too gullible about this info...)

I changed the irq_list in the pcmcia start script, and got the second card to work.

Maybe you should emphasize that the proc/interrupt info may miss a system's interrupt. I reread and found at the end the HOWTO's warning that I had missed (because pcmcia seemed to be probing ok in that it assigned IRQs and loaded...)

"Depending on system design, an inactive device can still occupy an interrupt and cause trouble .." That was true here. Thanks

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

Add Message to: "OK, I guess next time I will just ignore proc/interruptsI"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10