[ Next-in-Thread ]  [ Next Message ] 

Ok: OK, I guess next time I will just ignore proc/interruptsI 

Forum: PCMCIA Network Adapter Issues
Re: Question: Dual PCMCIA NIC system (Linksys plus NDC ) time outs and lost interrupts (Dale moberg)
Re: Sounds like a classic interrupt conflict (David Hinds)
Date: 2000, Jan 30
From: Dale moberg dmoberg

I did see that the case matched the HOWTO info, but I did not see any interrupt conflict in /proc/interrupt. (I now see I was too gullible about this info...)

I changed the irq_list in the pcmcia start script, and got the second card to work.

Maybe you should emphasize that the proc/interrupt info may miss a system's interrupt. I reread and found at the end the HOWTO's warning that I had missed (because pcmcia seemed to be probing ok in that it assigned IRQs and loaded...)

"Depending on system design, an inactive device can still occupy an interrupt and cause trouble .." That was true here. Thanks

[ Next-in-Thread ]  [ Next Message ] 

Select this message: OK, I guess next time I will just ignore proc/interruptsI

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]