[ Next-in-Thread ]  [ Next Message ] 

Question: Cardbus Tulip card works unreliably (system crash) 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Feb 03
From: <rolf.fiedler@ferrari.de>

I hvae a cardbus tulip based 10/100 eth card, and it is detected by the pcmcia core and the proper drivers are loaded.

The system is a palmax pd1000 running 2.2.14 with pcmcia 3.1.9.

once the card is inserted, it is detected and ifconfig and route is done. I can ping the network (reliably). I can do telnet and everything that does not transfer a lot of data.

However, if I try to transfer data (like a ftp download) the whole system freezes and I have to turn it off.

I don't know how to debug the problem, since the system crashes.

An ne2000 compatible ethernet card works like a charm, however it is a friend's card :-(.

On the cardbus card it says "Gericom Cardbus 10/100 Fast Ethernet"

I have tried to play around with the resource info in the pcmcia config., however without success (same behaviour). I have tried a 2.3.3? kernel, same result.

Any hints?

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Cardbus Tulip card works unreliably (system crash)

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. System log messages? by David Hinds, 2000, Feb 03
1. Feedback: sys log messages by rolf.fiedler@ferrari.de, 2000, Feb 04
2. More: detailed bug report by rolf.fiedler@ferrari.de, 2000, Feb 07
3. Warning: Problem resolved by rolf.fiedler@ferrari.de, 2000, Feb 08

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]