Next-in-Thread Next Message

Feedback sys log messages 

Forum: PCMCIA Network Adapter Issues
Re: Question Cardbus Tulip card works unreliably (system crash)
Re: None System log messages? (David Hinds)
Date: 2000, Feb 04
From: <rolf.fiedler@ferrari.de>

you asked for it... here it comes:

... while booting .... Feb 1 22:07:59 mini kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Feb  1 22:07:59 mini kernel: Linux PCMCIA Card Services 3.1.9
Feb  1 22:07:59 mini kernel:   kernel build: 2.2.14 #20 Die Feb 1 19:33:28
CET 2000
Feb  1 22:07:59 mini kernel:   options:  [pci] [cardbus] [apm]
Feb  1 22:07:59 mini kernel: PCI routing table version 1.0 at 0xfdf30
Feb  1 22:07:59 mini kernel:   unknown PCI interrupt router 1078:0002
Feb  1 22:07:59 mini kernel: Intel PCIC probe:
Feb  1 22:07:59 mini kernel:   TI 1220 PCI-to-CardBus at slot 00:0b, mem 0x68000000
Feb  1 22:07:59 mini kernel:     host opts [0]: [isa irq] [no pci irq] [lat 64/176] [bus 32/34]
Feb  1 22:07:59 mini kernel:     host opts [1]: [isa irq] [no pci irq] [lat 64/176] [bus 35/37]
Feb  1 22:07:59 mini kernel:     ISA irqs (scanned) = 3,4,10 polling interval = 1000 ms
Feb  1 22:07:59 mini kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Feb  1 22:07:59 mini kernel: cs: IO port probe 0x0800-0x08ff: clean.
Feb  1 22:07:59 mini kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x480-0x48f 0x4d0-0$
Feb  1 22:07:59 mini kernel: cs: IO port probe 0x0a00-0x0aff: excluding 0xaf8-0xaff
Feb  1 22:08:00 mini crond: crond startup succeeded
Feb  1 22:08:01 mini inet: inetd startup succeeded
Feb  1 22:08:02 mini xntpd: xntpd startup succeeded
... -> card insertion
Feb  1 22:10:53 mini cardmgr[204]: initializing socket 0
Feb  1 22:10:53 mini cardmgr[204]: socket 0: Linksys EtherFast 10/100
Feb  1 22:10:53 mini kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019$
Feb  1 22:10:53 mini cardmgr[204]: executing: 'insmod /lib/modules/2.2.14/pcmcia
/cb_enabler.o' Feb 1 22:10:53 mini cardmgr[204]: + /lib/modules/2.2.14/pcmcia/cb_enabler.o: a$ module named cb_enabler already exists
Feb  1 22:10:53 mini cardmgr[204]: insmod exited with status 1
Feb  1 22:10:53 mini cardmgr[204]: executing: 'modprobe cb_enabler'
Feb  1 22:10:53 mini kernel: cs: cb_config(bus 32)
Feb  1 22:10:53 mini kernel:   fn 0 bar 1: io 0x100-0x17f
Feb  1 22:10:53 mini kernel:   fn 0 bar 2: mem 0x600c0000-0x600c03ff
Feb  1 22:10:53 mini kernel:   fn 0 rom: mem 0x60080000-0x600bffff
Feb  1 22:10:53 mini kernel: tulip_attach(bus 32, function 0)
Feb  1 22:10:53 mini kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
Feb  1 22:10:53 mini kernel: eth0: Digital DS21143 Tulip rev 65 at 0x100, 00:E0:98:71:CD:61, IRQ 3.
Feb  1 22:10:53 mini kernel: eth0:  EEPROM default media type Autosense.
Feb  1 22:10:53 mini kernel: eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Feb  1 22:10:53 mini kernel: eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.
Feb  1 22:10:54 mini cardmgr[204]: executing: './network start eth0'
Feb  1 22:12:19 mini xntpd[345]: synchronized to LOCAL(0), stratum=10
Feb  1 22:12:19 mini xntpd[345]: kernel pll status change 89

-> crash happened here
-> next boot
Feb  2 08:33:11 mini syslogd 1.3-3: restart.
Feb  2 08:33:11 mini syslog: syslogd startup succeeded
Feb  2 08:33:11 mini syslog: klogd startup succeeded
Feb  2 08:33:11 mini kernel: klogd 1.3-3, log source = /proc/kmsg started.
Feb  2 08:33:11 mini kernel: Inspecting /boot/System.map-2.2.14
Feb  2 08:33:12 mini kernel: Loaded 5942 symbols from /boot/System.map-2.2.14.
Feb  2 08:33:12 mini kernel: Symbols match kernel version 2.2.14.
Feb  2 08:33:12 mini kernel: Loaded 61 symbols from 7 modules.
Feb  2 08:33:12 mini kernel: Linux version 2.2.14 (rfie@server.private.net)
(gcc
 version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #20 Die Feb 1 19:33:28 CET 2000
Feb  2 08:33:12 mini kernel: Console: colour VGA+ 80x25
Feb  2 08:33:12 mini kernel: Calibrating delay loop... 55.50 BogoMIPS
...

As far as I can see from that, the start of the pcmcia modules went ok, and the start of the network (card insertion) was ok. There were no syslog messages related to the system freeze, since the cpu just stopped (no time to write anything).

I am afraid that is not very helpful

Next-in-Thread Next Message

Add Message to: "sys log messages"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10