Next-in-Thread Next Message

More Argosy 10/100 more info 

Forum: PCMCIA Network Adapter Issues
Re: Question Argosy 10/100 EN-235 (Robert Rossmann)
Date: 2000, Feb 17
From: Robert Rossmann rbr

I insert the memory region 0x5042000-0x50421ff which I found from the Windows driver of these card. Now the output of

cardctl ident is

Socket 1:

produkt info: " ARGOSY", "CardBus Ethernet 10/100 (R5)"

function: 6 (network)

and of

cardctl config is

Socket 1:

Vcc 3.3V Vpp1 3.3V Vpp2 3.3V

interface type is "cardbus"

function 0:

I tried to use this info in the config file but still the card won't work. Must I do anythink else to use a 32bit cardbus card?

thx

Robert

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 2 3

None Re: More: Argosy 10/100 more info

Re: More Argosy 10/100 more info (Robert Rossmann)
Date: 2000, Feb 17
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> 
> I tried to use this info in the config file but still the card won't
> work. Must I do anythink else to use a 32bit cardbus card?

What did you add to the config file, exactly?  (what driver did you
specify?)  You could try either tulip_cb or epic_cb; tulip_cb would be
the more likely guess.  If those don't work, then this card would
appear to use an unsupported CardBus network controller (all the other
PCMCIA network drivers are strictly for 16-bit cards).

-- Dave
1. More Used both tulip_cb and epic_cb by Robert Rossmann, 2000, Feb 18
(_ More More info by Robert Rossmann, 2000, Feb 21
(_ None You are currently out of luck by David Hinds, 2000, Feb 21
Argosy 10/100 more info


Add Message to: "Argosy 10/100 more info"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10