[ Next-in-Thread ]  [ Next Message ] 

More: Used both tulip_cb and epic_cb 

Forum: PCMCIA Network Adapter Issues
Re: Question: Argosy 10/100 EN-235 (Robert Rossmann)
Re: More: Argosy 10/100 more info (Robert Rossmann)
Re: Re: More: Argosy 10/100 more info (David Hinds)
Date: 2000, Feb 18
From: Robert Rossmann rbr

Entry in the config file 

card "Argosy EN235 Fast Ethernet"
  manfid 0x10ec, 0x8138
  bind "tulip_cb"

output in the message file 

Feb 18 07:55:26 armin kernel: Linux PCMCIA Card Services 3.1.3
Feb 18 07:55:26 armin kernel:   kernel build: 2.2.13 #1 Mon Nov 8 18:28:35 GMT 1999
Feb 18 07:55:26 armin kernel:   options:  [pci] [cardbus] [pnp]
Feb 18 07:55:26 armin kernel: PnP: PNP BIOS installation structure at 0xc00ff000
Feb 18 07:55:26 armin kernel: PnP: PNP BIOS version 1.0, entry at e4000:a41, dseg at e4000
Feb 18 07:55:26 armin kernel: PCI routing table version 1.0 at 0xf2bb0
Feb 18 07:55:26 armin kernel:   unknown PCI interrupt router 1045:c558
Feb 18 07:55:26 armin kernel: Intel PCIC probe: 
Feb 18 07:55:26 armin kernel:   TI 1130 PCI-to-CardBus at bus 0 slot 7, mem 0x68000000, 2 sockets
Feb 18 07:55:26 armin kernel:     host opts [0]: [ring] [isa irq] [no pci irq] [lat 168/176] [bus 2/2]
Feb 18 07:55:26 armin kernel:     host opts [1]: [ring] [isa irq] [no pci irq] [lat 168/176] [bus 3/3]
Feb 18 07:55:26 armin kernel:     ISA irqs (scanned) = 7,9,10,11,12 status change on irq 11

The windows CardBus controller uses E/A 1400-14FF memory: 0x5042000-0x5423fff interrupt: 10

must or can I use this info for the Linux cardbus controller?

thx Robert

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. More: More info by Robert Rossmann, 2000, Feb 21
... 1 Message(s)

[ Add Message ]  to: "Used both tulip_cb and epic_cb"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]