Next-in-Thread Next Message

Note Problem with ADDTRON Fast Ethernet card 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Feb 17
From: Andreas-Johann Ulvestad aj

I am currently having problems with my new pcmcia card. It is made by ADDTRON, and I belive it uses an intel chip (pcmcia loads the i82365 module, but it doesn't seem to work - I get 'Delaying eth0 initialization.' when trying to configure the interface.

Linux PCMCIA Card Services 3.1.8
 kernel build: 2.2.15-2.5.0 #1 Sat Feb 5 00:13:43 EST 2000
 options: [pci] [cardbus] [apmd] [pnp]
PnP: PNP BIOS installation structure at 0xc00f7fc0
PnP: PNP BIOS version 1.0, entry at f0000:a954, dseg at 400
PCI routing table version 1.0 at 0xfdf70
  unknown PCI interrupt router 1045:c700
Intel PCIC probe:
  TI 1131 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
    host opts: [0]: [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34]
     host opts [1]: [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 35/37]
     ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms
cardmgr[646]: starting, version is 3.1.8
cardmgr[646]: wathcing 2 sockets
kernel: cs: IO port probe 0x1000-0x17ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: exluding 0x378-0x37f
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[646]: initializing socket 0
kernel: cs: memory probe 0xa000000-0xa0fffff: clean.
cardmgr[646]: unsupported card in socket 0
cardmgr[646]: product info: "PCMCIA", "FastEthernet", "V", "1.0"
cardmgr[646]: manfid: 0x021b, 0x0202 function: 6 (network)


Any ideas?

Next-in-Thread Next Message

Select this message: Problem with ADDTRON Fast Ethernet card

Messages Inline: 1 All Outline: 1 2 All

1. None It isn't an Intel network device by David Hinds, 2000, Feb 17
(_ More Done that, doesn't work by Andreas-Johann Ulvestad, 2000, Feb 17
(_ More af-680 ? by Poul Erik Laursen, 2000, Feb 18
1. None That card is not a true NE2000 by David Hinds, 2000, Feb 18
2. Question Someone got AF-680 (Addtron PCMCIA NIC) work? by Armando Montiel, 2000, Jul 10
1. None The regular pcnet_cs driver won't work by David Hinds, 2000, Jul 10
... 1 Message(s)

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]