|
I am currently having problems with my new pcmcia card. It is made by ADDTRON, and I belive it uses an intel chip (pcmcia loads the i82365 module, but it doesn't seem to work - I get 'Delaying eth0 initialization.' when trying to configure the interface. --LOG-- Linux PCMCIA Card Services 3.1.8 kernel build: 2.2.15-2.5.0 #1 Sat Feb 5 00:13:43 EST 2000 options: [pci] [cardbus] [apmd] [pnp] PnP: PNP BIOS installation structure at 0xc00f7fc0 PnP: PNP BIOS version 1.0, entry at f0000:a954, dseg at 400 PCI routing table version 1.0 at 0xfdf70 unknown PCI interrupt router 1045:c700 Intel PCIC probe: TI 1131 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets host opts: [0]: [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34] host opts [1]: [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 35/37] ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms cardmgr[646]: starting, version is 3.1.8 cardmgr[646]: wathcing 2 sockets kernel: cs: IO port probe 0x1000-0x17ff: clean. kernel: cs: IO port probe 0x0100-0x04ff: exluding 0x378-0x37f kernel: cs: IO port probe 0x0a00-0x0aff: clean. cardmgr[646]: initializing socket 0 kernel: cs: memory probe 0xa000000-0xa0fffff: clean. cardmgr[646]: unsupported card in socket 0 cardmgr[646]: product info: "PCMCIA", "FastEthernet", "V", "1.0" cardmgr[646]: manfid: 0x021b, 0x0202 function: 6 (network) --END LOG-- Any ideas? |
Messages