I am currently having problems with my new pcmcia card. It is made by ADDTRON, and I belive it uses an intel chip (pcmcia loads the i82365 module, but it doesn't seem to work - I get 'Delaying eth0 initialization.' when trying to configure the interface.|
Linux PCMCIA Card Services 3.1.8
kernel build: 2.2.15-2.5.0 #1 Sat Feb 5 00:13:43 EST 2000
options: [pci] [cardbus] [apmd] [pnp]
PnP: PNP BIOS installation structure at 0xc00f7fc0
PnP: PNP BIOS version 1.0, entry at f0000:a954, dseg at 400
PCI routing table version 1.0 at 0xfdf70
unknown PCI interrupt router 1045:c700
Intel PCIC probe:
TI 1131 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
host opts: : [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34]
host opts : [ring] [pci + serial irq] [no pci irq] [lat 168/176] [bus 35/37]
ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms
cardmgr: starting, version is 3.1.8
cardmgr: wathcing 2 sockets
kernel: cs: IO port probe 0x1000-0x17ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: exluding 0x378-0x37f
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr: initializing socket 0
kernel: cs: memory probe 0xa000000-0xa0fffff: clean.
cardmgr: unsupported card in socket 0
cardmgr: product info: "PCMCIA", "FastEthernet", "V", "1.0"
cardmgr: manfid: 0x021b, 0x0202 function: 6 (network)