Next-in-Thread Next Message

Question Dynalink L100C32 not recognized 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Feb 22
From: Jasper Spit jasper


I have a Dynalink L100C32 pcmcia network adapter which isn't recognized by cardmgr. This is the output I get :

cardctl config:

Socket 0:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3v
  interface type is "cardbus"
  function 0:
Socket 1:
  not configured

cardctl ident:

Socket 0:
  product info: "PCMCIA", "CardBus Ethernet 10/100 (R5)"
  function 6 (network)
Socket 1:
  no product info available

when inserting the card, dmesg gives me this :

cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138

that's all :(

I already tried to modify the pcmcia config file by adding a new entry using manfid 0x10ec, 0x8138, but with no luck. (yes, I made cardmgr re-read the configfile).

Can anybody tell me how I can get this card to work ?

Kernel = 2.2.13

Thanks !!


Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Wrong ID numbers by David Hinds, 2000, Feb 22
(_ Sad No luck by Jasper Spit, 2000, Feb 22

Add Message to: "Dynalink L100C32 not recognized"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10