[ Next-in-Thread ]  [ Next Message ] 

Question: Dynalink L100C32 not recognized 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Feb 22
From: Jasper Spit jasper

Hi,

I have a Dynalink L100C32 pcmcia network adapter which isn't recognized by cardmgr. This is the output I get :

cardctl config: 

Socket 0:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3v
  interface type is "cardbus"
  function 0:
Socket 1:
  not configured

cardctl ident: 

Socket 0:
  product info: "PCMCIA", "CardBus Ethernet 10/100 (R5)"
  function 6 (network)
Socket 1:
  no product info available

when inserting the card, dmesg gives me this :

cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138

that's all :(

I already tried to modify the pcmcia config file by adding a new entry using manfid 0x10ec, 0x8138, but with no luck. (yes, I made cardmgr re-read the configfile).

Can anybody tell me how I can get this card to work ?

Kernel = 2.2.13

Thanks !!

jasper

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. Wrong ID numbers by David Hinds, 2000, Feb 22
... 1 Message(s)

[ Add Message ]  to: "Dynalink L100C32 not recognized"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]