Sad: It fails anyway 

Forum: PCMCIA Network Adapter Issues
Re: Question: Wisecom PC-400 10/100 - Doesn`t work (Francesc Bassas)
Re: The wrong driver is being loaded (David Hinds)
Date: 2000, Feb 25
From: Francesc Bassas frankb

Fist of all, thanks to David for his suggestion. In fact, that's what I tried before getting a newer drivers version. Anyway I have tried ance again, I that's what I get: cardmgr[57]: initializing socket 1 cs: memory probe 0xa0000000-0xa0ffffff: clean. cardmgr[57]: socket 1: WiseCom WC-PC400 Fast Ethernet cardmgr[57]:executing: 'insmod/lib/modules/2.2.13/pcmcia/smc91c92_cs.o' smc91c92_cs: using 8-bit IO window. eth0: smc91c??? rev 13: io 0x100, irq 9, hw_addr FF:FF:FF:FF:FF:FF cardmgr[57]: executing: './network start eth0' cardmgr[57]: + cat: /var/state/pcmcia/scheme: No such file or directory smc91c92_cs: Yikes! Bad chip signature! Configuring eth0 as 147.83.143.192... smc91c92_cs: Yikes! Bad chip signature! cardmgr[57]: + SIOCSIFFLAGS: No such device It's worse. What else ca I try?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Sorry, ignore that suggestion Re: Sad: It fails anyway (Francesc Bassas) Date: 2000, Apr 04 From: David Hinds <dhinds@pcmcia.sourceforge.org>

Sorry; I re-read your message and you seemed to say that you did get "ping" to work at least once, so the pcnet_cs driver has to be the right one. In that case, I think I would want to see more of your system log messages. Do you get any error messages from the driver when you try to open an ftp or telnet connection? -- Dave

[ Add Message ]  to: "It fails anyway"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]