Last sunday I sent an e-mail to support@dynalink.nl and on monday (this guys are really fast), they sent me a DOS utility to upgrade the CIS (it gives the card a manufacturer id, so cardctl can detect it) and an experimental linux driver (the card uses a realtek 8139 chip, so the driver is the rtl8139.c from Donald Becker, with a patch to detect the IRQ). I've tested it and it works, but only if you have two cards. I did two tests: 1. In my first test I was using another card on slot 0 (a friend's Dynalink L10C) and when i inserted the LC100C32 it worked fine. 2. In the second test, i used only the LC100C32, but it locks the machine. I suppose the problem is in the patch to detect the IRQ, but i think it's easy to fix, if i succed i'll post a message with the patches. Sergio |