Next-in-Thread Next Message

Question Argosy EN-235 continued. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Mar 15
From: Robert Rossmann rbr

I installed the new pcmcia package 3.1.13 and now the card is found but it won't work. This are the entries in the /var/log/messages file

This is for tulip

Mar 15 14:22:07 armin cardmgr[785]: starting, version is 3.1.13
Mar 15 14:22:07 armin cardmgr[785]: watching 2 sockets
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x1000-0x17ff: clean.
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 15 14:22:07 armin cardmgr[785]: initializing socket 0
Mar 15 14:22:07 armin cardmgr[785]: socket 0: Argosy EN-235 Fast Ethernet
Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o'
Mar 15 14:22:07 armin kernel: cs: cb_config(bus 2)
Mar 15 14:22:07 armin kernel:   fn 0 bar 1: io 0xa00-0xaff
Mar 15 14:22:07 armin kernel:   fn 0 bar 2: mem 0x5042000-0x50421ff
Mar 15 14:22:07 armin kernel: cs: cb_enable(bus 2)
Mar 15 14:22:07 armin kernel:   bridge io map 0 (flags 0x21): 0xa00-0xaff
Mar 15 14:22:07 armin kernel:   bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff
Mar 15 14:22:07 armin kernel: tulip_reap()
Mar 15 14:22:07 armin kernel: tulip_attach(bus 2, function 0)
Mar 15 14:22:07 armin kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Mar 15 14:22:07 armin kernel: eth0: Digital DS21143 Tulip rev 16 at 0xa00, EEPROM not present, 00:4C:69:6E:75:79, IRQ 9.
Mar 15 14:22:07 armin kernel: eth0:  Missing EEPROM, this interface may not work correctly!
Mar 15 14:22:07 armin cardmgr[785]: executing: './network start eth0'
Mar 15 14:22:10 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:10 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:16 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:16 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:22 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:22 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:28 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:28 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:34 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:34 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:35 armin cardmgr[785]: executing: './network check eth0'
Mar 15 14:22:36 armin cardmgr[785]: shutting down socket 0
Mar 15 14:22:36 armin cardmgr[785]: executing: './network stop eth0'
Mar 15 14:22:36 armin kernel: tulip_detach(eth0)
Mar 15 14:22:36 armin kernel: cs: cb_disable(bus 2)
Mar 15 14:22:36 armin kernel: cs: cb_release(bus 2)
Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod tulip_cb'
Mar 15 14:22:36 armin kernel: tulip_reap()
Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod cb_enabler'
Mar 15 14:22:36 armin cardmgr[785]: exiting

This is for epic

Mar 15 14:24:08 armin cardmgr[835]: starting, version is 3.1.13
Mar 15 14:24:08 armin cardmgr[835]: watching 2 sockets
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x1000-0x17ff: clean.
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 15 14:24:08 armin cardmgr[835]: initializing socket 0
Mar 15 14:24:08 armin cardmgr[835]: socket 0: Argosy EN-235 Fast Ethernet
Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/epic_cb.o'
Mar 15 14:24:08 armin kernel: epic100.c:v1.06 2/10/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html
Mar 15 14:24:08 armin kernel: cs: cb_config(bus 2)
Mar 15 14:24:08 armin kernel:   fn 0 bar 1: io 0xa00-0xaff
Mar 15 14:24:08 armin kernel:   fn 0 bar 2: mem 0x5042000-0x50421ff
Mar 15 14:24:08 armin kernel: cs: cb_enable(bus 2)
Mar 15 14:24:08 armin kernel:   bridge io map 0 (flags 0x21): 0xa00-0xaff
Mar 15 14:24:08 armin kernel:   bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff
Mar 15 14:24:08 armin kernel: epic_attach(bus 2, function 0)
Mar 15 14:24:08 armin kernel: eth0: SMSC EPIC/C 83c175 at 0xa00, IRQ 9, 00:00:40:00:aa:4a.
Mar 15 14:24:08 armin kernel: eth0: ***WARNING***: No MII transceiver found!
Mar 15 14:24:08 armin cardmgr[835]: executing: './network start eth0'
Mar 15 14:24:16 armin cardmgr[835]: executing: './network check eth0'
Mar 15 14:24:17 armin cardmgr[835]: shutting down socket 0
Mar 15 14:24:17 armin cardmgr[835]: executing: './network stop eth0'
Mar 15 14:24:17 armin kernel: epic_detach(eth0)
Mar 15 14:24:17 armin kernel: cs: cb_disable(bus 2)
Mar 15 14:24:17 armin kernel: cs: cb_release(bus 2)
Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod epic_cb'
Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod cb_enabler'
Mar 15 14:24:17 armin cardmgr[835]: exiting

Any clues?

Thx

Robert

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None That doesn't look so good to me by David Hinds, 2000, Mar 15
(_ More No wrong HW address by Robert Rossmann, 2000, Mar 16
(_ None So it isn't a tulip at all by David Hinds, 2000, Mar 16

Add Message to: "Argosy EN-235 continued."

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10