Question: Argosy EN-235 continued. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Mar 15
From: Robert Rossmann rbr

I installed the new pcmcia package 3.1.13 and now the card is found but it won't work. This are the entries in the /var/log/messages file This is for tulip Mar 15 14:22:07 armin cardmgr[785]: starting, version is 3.1.13 Mar 15 14:22:07 armin cardmgr[785]: watching 2 sockets Mar 15 14:22:07 armin kernel: cs: IO port probe 0x1000-0x17ff: clean. Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean. Mar 15 14:22:07 armin cardmgr[785]: initializing socket 0 Mar 15 14:22:07 armin cardmgr[785]: socket 0: Argosy EN-235 Fast Ethernet Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o' Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o' Mar 15 14:22:07 armin kernel: cs: cb_config(bus 2) Mar 15 14:22:07 armin kernel: fn 0 bar 1: io 0xa00-0xaff Mar 15 14:22:07 armin kernel: fn 0 bar 2: mem 0x5042000-0x50421ff Mar 15 14:22:07 armin kernel: cs: cb_enable(bus 2) Mar 15 14:22:07 armin kernel: bridge io map 0 (flags 0x21): 0xa00-0xaff Mar 15 14:22:07 armin kernel: bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff Mar 15 14:22:07 armin kernel: tulip_reap() Mar 15 14:22:07 armin kernel: tulip_attach(bus 2, function 0) Mar 15 14:22:07 armin kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Mar 15 14:22:07 armin kernel: eth0: Digital DS21143 Tulip rev 16 at 0xa00, EEPROM not present, 00:4C:69:6E:75:79, IRQ 9. Mar 15 14:22:07 armin kernel: eth0: Missing EEPROM, this interface may not work correctly! Mar 15 14:22:07 armin cardmgr[785]: executing: './network start eth0' Mar 15 14:22:10 armin kernel: eth0: Tx hung, 11 vs. 0. Mar 15 14:22:10 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... Mar 15 14:22:16 armin kernel: eth0: Tx hung, 11 vs. 0. Mar 15 14:22:16 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... Mar 15 14:22:22 armin kernel: eth0: Tx hung, 11 vs. 0. Mar 15 14:22:22 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... Mar 15 14:22:28 armin kernel: eth0: Tx hung, 11 vs. 0. Mar 15 14:22:28 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... Mar 15 14:22:34 armin kernel: eth0: Tx hung, 11 vs. 0. Mar 15 14:22:34 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... Mar 15 14:22:35 armin cardmgr[785]: executing: './network check eth0' Mar 15 14:22:36 armin cardmgr[785]: shutting down socket 0 Mar 15 14:22:36 armin cardmgr[785]: executing: './network stop eth0' Mar 15 14:22:36 armin kernel: tulip_detach(eth0) Mar 15 14:22:36 armin kernel: cs: cb_disable(bus 2) Mar 15 14:22:36 armin kernel: cs: cb_release(bus 2) Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod tulip_cb' Mar 15 14:22:36 armin kernel: tulip_reap() Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod cb_enabler' Mar 15 14:22:36 armin cardmgr[785]: exiting This is for epic Mar 15 14:24:08 armin cardmgr[835]: starting, version is 3.1.13 Mar 15 14:24:08 armin cardmgr[835]: watching 2 sockets Mar 15 14:24:08 armin kernel: cs: IO port probe 0x1000-0x17ff: clean. Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean. Mar 15 14:24:08 armin cardmgr[835]: initializing socket 0 Mar 15 14:24:08 armin cardmgr[835]: socket 0: Argosy EN-235 Fast Ethernet Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o' Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/epic_cb.o' Mar 15 14:24:08 armin kernel: epic100.c:v1.06 2/10/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html Mar 15 14:24:08 armin kernel: cs: cb_config(bus 2) Mar 15 14:24:08 armin kernel: fn 0 bar 1: io 0xa00-0xaff Mar 15 14:24:08 armin kernel: fn 0 bar 2: mem 0x5042000-0x50421ff Mar 15 14:24:08 armin kernel: cs: cb_enable(bus 2) Mar 15 14:24:08 armin kernel: bridge io map 0 (flags 0x21): 0xa00-0xaff Mar 15 14:24:08 armin kernel: bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff Mar 15 14:24:08 armin kernel: epic_attach(bus 2, function 0) Mar 15 14:24:08 armin kernel: eth0: SMSC EPIC/C 83c175 at 0xa00, IRQ 9, 00:00:40:00:aa:4a. Mar 15 14:24:08 armin kernel: eth0: ***WARNING***: No MII transceiver found! Mar 15 14:24:08 armin cardmgr[835]: executing: './network start eth0' Mar 15 14:24:16 armin cardmgr[835]: executing: './network check eth0' Mar 15 14:24:17 armin cardmgr[835]: shutting down socket 0 Mar 15 14:24:17 armin cardmgr[835]: executing: './network stop eth0' Mar 15 14:24:17 armin kernel: epic_detach(eth0) Mar 15 14:24:17 armin kernel: cs: cb_disable(bus 2) Mar 15 14:24:17 armin kernel: cs: cb_release(bus 2) Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod epic_cb' Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod cb_enabler' Mar 15 14:24:17 armin cardmgr[835]: exiting Any clues? Thx Robert

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

That doesn't look so good to me Re: Question: Argosy EN-235 continued. (Robert Rossmann) Date: 2000, Mar 15 From: David Hinds <dhinds@pcmcia.sourceforge.org>

Based on the output, I'd say that you are out of luck unless you can find out from the vendor what chipset this card uses. Is the hw address reported by the tulip driver correct? Maybe it is just a new / unsupported tulip variant. I am not familiar enough with that driver to have any specific suggestions for what modifications might be needed to make the driver work with this card. -- Dave

1. More: No wrong HW address by Robert Rossmann, 2000, Mar 16 (_ So it isn't a tulip at all by David Hinds, 2000, Mar 16

[ Add Message ]  to: "Argosy EN-235 continued."

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]