Next-in-Thread Next Message

Question Argosy EN-235 continued. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Mar 15
From: Robert Rossmann rbr

I installed the new pcmcia package 3.1.13 and now the card is found but it won't work. This are the entries in the /var/log/messages file

This is for tulip

Mar 15 14:22:07 armin cardmgr[785]: starting, version is 3.1.13
Mar 15 14:22:07 armin cardmgr[785]: watching 2 sockets
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x1000-0x17ff: clean.
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
Mar 15 14:22:07 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 15 14:22:07 armin cardmgr[785]: initializing socket 0
Mar 15 14:22:07 armin cardmgr[785]: socket 0: Argosy EN-235 Fast Ethernet
Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Mar 15 14:22:07 armin cardmgr[785]: executing: 'insmod /lib/modules/2.2.13/pcmcia/tulip_cb.o'
Mar 15 14:22:07 armin kernel: cs: cb_config(bus 2)
Mar 15 14:22:07 armin kernel:   fn 0 bar 1: io 0xa00-0xaff
Mar 15 14:22:07 armin kernel:   fn 0 bar 2: mem 0x5042000-0x50421ff
Mar 15 14:22:07 armin kernel: cs: cb_enable(bus 2)
Mar 15 14:22:07 armin kernel:   bridge io map 0 (flags 0x21): 0xa00-0xaff
Mar 15 14:22:07 armin kernel:   bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff
Mar 15 14:22:07 armin kernel: tulip_reap()
Mar 15 14:22:07 armin kernel: tulip_attach(bus 2, function 0)
Mar 15 14:22:07 armin kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Mar 15 14:22:07 armin kernel: eth0: Digital DS21143 Tulip rev 16 at 0xa00, EEPROM not present, 00:4C:69:6E:75:79, IRQ 9.
Mar 15 14:22:07 armin kernel: eth0:  Missing EEPROM, this interface may not work correctly!
Mar 15 14:22:07 armin cardmgr[785]: executing: './network start eth0'
Mar 15 14:22:10 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:10 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:16 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:16 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:22 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:22 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:28 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:28 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:34 armin kernel: eth0: Tx hung, 11 vs. 0.
Mar 15 14:22:34 armin kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting...
Mar 15 14:22:35 armin cardmgr[785]: executing: './network check eth0'
Mar 15 14:22:36 armin cardmgr[785]: shutting down socket 0
Mar 15 14:22:36 armin cardmgr[785]: executing: './network stop eth0'
Mar 15 14:22:36 armin kernel: tulip_detach(eth0)
Mar 15 14:22:36 armin kernel: cs: cb_disable(bus 2)
Mar 15 14:22:36 armin kernel: cs: cb_release(bus 2)
Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod tulip_cb'
Mar 15 14:22:36 armin kernel: tulip_reap()
Mar 15 14:22:36 armin cardmgr[785]: executing: 'rmmod cb_enabler'
Mar 15 14:22:36 armin cardmgr[785]: exiting

This is for epic

Mar 15 14:24:08 armin cardmgr[835]: starting, version is 3.1.13
Mar 15 14:24:08 armin cardmgr[835]: watching 2 sockets
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x1000-0x17ff: clean.
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
Mar 15 14:24:08 armin kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 15 14:24:08 armin cardmgr[835]: initializing socket 0
Mar 15 14:24:08 armin cardmgr[835]: socket 0: Argosy EN-235 Fast Ethernet
Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Mar 15 14:24:08 armin cardmgr[835]: executing: 'insmod /lib/modules/2.2.13/pcmcia/epic_cb.o'
Mar 15 14:24:08 armin kernel: epic100.c:v1.06 2/10/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html
Mar 15 14:24:08 armin kernel: cs: cb_config(bus 2)
Mar 15 14:24:08 armin kernel:   fn 0 bar 1: io 0xa00-0xaff
Mar 15 14:24:08 armin kernel:   fn 0 bar 2: mem 0x5042000-0x50421ff
Mar 15 14:24:08 armin kernel: cs: cb_enable(bus 2)
Mar 15 14:24:08 armin kernel:   bridge io map 0 (flags 0x21): 0xa00-0xaff
Mar 15 14:24:08 armin kernel:   bridge mem map 0 (flags 0x1): 0x5042000-0x5042fff
Mar 15 14:24:08 armin kernel: epic_attach(bus 2, function 0)
Mar 15 14:24:08 armin kernel: eth0: SMSC EPIC/C 83c175 at 0xa00, IRQ 9, 00:00:40:00:aa:4a.
Mar 15 14:24:08 armin kernel: eth0: ***WARNING***: No MII transceiver found!
Mar 15 14:24:08 armin cardmgr[835]: executing: './network start eth0'
Mar 15 14:24:16 armin cardmgr[835]: executing: './network check eth0'
Mar 15 14:24:17 armin cardmgr[835]: shutting down socket 0
Mar 15 14:24:17 armin cardmgr[835]: executing: './network stop eth0'
Mar 15 14:24:17 armin kernel: epic_detach(eth0)
Mar 15 14:24:17 armin kernel: cs: cb_disable(bus 2)
Mar 15 14:24:17 armin kernel: cs: cb_release(bus 2)
Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod epic_cb'
Mar 15 14:24:17 armin cardmgr[835]: executing: 'rmmod cb_enabler'
Mar 15 14:24:17 armin cardmgr[835]: exiting

Any clues?

Thx

Robert

Next-in-Thread Next Message

Select this message: Argosy EN-235 continued.

Messages Inline: 1 All Outline: 1 3 All

1. None That doesn't look so good to me by David Hinds, 2000, Mar 15
(_ More No wrong HW address by Robert Rossmann, 2000, Mar 16
(_ None So it isn't a tulip at all by David Hinds, 2000, Mar 16

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]