Next-in-Thread Next Message

Agree success!!!!!!!! 

Forum: PCMCIA Network Adapter Issues
Re: Question trouble with netgear FA410TXC (Matthew Austin)
Re: Feedback Hardware Version (Jochen Friedrich)
Re: Sad tried code but no go, MAC address within problem range (Matthew Austin)
Re: More What version (Jochen Friedrich)
Re: None ioperm() vs iopl() issue (David Hinds)
Date: 2000, Apr 01
From: Matthew Austin yogi


Dave I removed the exclusion on the port range previously in
place (per trouble shooting section on this site) to try and
isolate the issue from a possible hardware conflict with another device.

From my original post . . .
"I have forced a change in io port and IRQ to see if that was
an issue as recommended by changing config.opts . . . no
After removing those changes Jochen's binary now works, but I
imagine my own compile of his source would work now as well.

Thanks to you both.


PS I was getting ready to purchase a 3com 3c575 off ebay as
cowboyneal reported that working flawlessly for him . . . ;-)

Next-in-Thread Next Message

Add Message to: "success!!!!!!!!"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10