Next-in-Thread Next Message

Question IBM ethernet card don't work 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Apr 07
From: borg1 borg1

 have a Acer travel mate 514t and a IBM credit card adapter ethernet adapter 2 pcmcia network card.
I installed the installed the pcmcia-cs 3.1.13 and i am using linux mandrake 7.0 with kernel 2.2.14.When i insert the card it finds it and beeps and the cardmgr tells me the name of the card so it must be able to see it.But the network card will not work i have configured the network and the laptop becomes slow when i insert the card.

 The error given in dmesg is

eth0: Tx timed out, cable problem? TSR=0x3, ISR=0x0, t=2000. eth0: pcnet_reset_8390() did not complete.
Hw. address read/write mismap 2
Hw. address read/write mismap 4
[root@laptop /]#

the card has two network fittings one a RJ 45 which i use and one bnc 10 base T
I hardly use the bnc one but do on the odd occasion some times.

And the led lights up when i insert the card and the access led blinks some times.

card ident

[root@laptop /]# cardctl ident
Socket 0:
  no product info available
Socket 1:
  product info: "IBM Corp.", "Ethernet", "0934214", "PC-NIC ENCC 990010759-001A" manfid: 0x00a4, 0x0002
  function: 6 (network)
[root@laptop /]#


eth0: pcnet_reset_8390() did not complete.
eth0: NE2000 Compatible: io 0x300, irq 3, mem 0xc805c000, auto xcvr, hw_addr 00:04:AC:24:1E:24
Hw. address read/write mismap 2
Hw. address read/write mismap 4
[root@laptop /]#

the loptop runs slowley when the card is inserted and some times the hard disk will go insane and fill the screen up with the
Hw. address read/write mismap 2
Hw. address read/write mismap 4
and then stops when you take the card out but this onley happens then you have the card in slot 1

Next-in-Thread Next Message

Select this message: IBM ethernet card don't work

Messages Inline: 1 All Outline: 2 3 All

1. None Maybe a resource conflict by David Hinds, 2000, Apr 07

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]