Question: SMC EZ CardBus 10/100 PC Card 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Apr 09
From: Andreas-Johann Ulvestad aj

I am currently using a pcmcia ethernet adapter, SMC EZ CardBus 10/100 PC Card is reported by cardmgr when booting or inserting the card. This is all well, but inserting "alias eth0 pcnet_cs" in /etc/conf.modules, I get "Delaying eth0 initialization" when ifup'ing eth0. Is this the correct module to be using?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Wrong driver; also, don't list PCMCIA drivers in conf.modules Re: Question: SMC EZ CardBus 10/100 PC Card (Andreas-Johann Ulvestad) Date: 2000, Apr 10 From: David Hinds <dhinds@pcmcia.sourceforge.org>

Don't put anything in /etc/conf.modules for PCMCIA devices. It does not do anything useful. The SMC EZ CardBus card is listed in the SUPPORTED.CARDS file as using the tulip_cb driver. The right driver should be loaded automatically. You should probably check your system log to see what's really going on. -- Dave

1. More: hmm....ok? by Andreas-Johann Ulvestad, 2000, Apr 10 (_ Check your system log by David Hinds, 2000, Apr 10

[ Add Message ]  to: "SMC EZ CardBus 10/100 PC Card"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]