Wrong driver; also, don't list PCMCIA drivers in conf.modules 

Forum: PCMCIA Network Adapter Issues
Re: Question: SMC EZ CardBus 10/100 PC Card (Andreas-Johann Ulvestad)
Date: 2000, Apr 10
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Don't put anything in /etc/conf.modules for PCMCIA devices. It does not do anything useful. The SMC EZ CardBus card is listed in the SUPPORTED.CARDS file as using the tulip_cb driver. The right driver should be loaded automatically. You should probably check your system log to see what's really going on. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

More: hmm....ok? Re: Wrong driver; also, don't list PCMCIA drivers in conf.modules (David Hinds) Date: 2000, Apr 10 From: Andreas-Johann Ulvestad aj

I have removed the line from conf.modules, but pcmcia cardmgr doesn't load the tulip_cb module, and when modprobing it manually, it doesn't produce any error messages, but on the other hand, ifuping eth0 doesn't work either...and not sh -x /etc/pcmcia/network start eth0 either: Delaying eth0 initialization.

1. Check your system log by David Hinds, 2000, Apr 10

[ Add Message ]  to: "Wrong driver; also, don't list PCMCIA drivers in conf.modules"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]