Next-in-Thread Next Message

Question kernel: eth0: transmit timed out, tx_status 00 status e000. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Apr 11
From: Bernard BARBIER BernardJB

hello,

Could some body tell me what's wrong ? My network interface works well 
during 3 or 4 minutes and then stops, and restart...

in order : 
- error messages : 

kernel: eth0: transmit timed out, tx_status 00 status e000.
kernel: eth0: Tx Ring full, refusing to send buffer. 
cardmgr[334]: + ioctl: Operation not supported

- pcmcia-cs-3.1.13
- kernel : linux-2.2.5  (redhat)
- laptop : Dell inspiron 7500
- files :
/etc/sysconfig/pcmcia
/proc/interrupt
/var/log/messages

Any help would be grately appreciated ! 

From France, BERNARD!

---


/etc/sysconfig/pcmcia
PCMCIA=yes
PCIC=i82365
PCIC_OPTS="do_scan=0 irq_list=3,5"
CORE_OPTS=

 /proc/interrupts 
           CPU0       
  0:     328922          XT-PIC  timer
  1:       2815          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:     606111          XT-PIC  eth0
  8:          2          XT-PIC  rtc
 12:     111621          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:     619092          XT-PIC  ide0
 15:          5          XT-PIC  ide1
NMI:          0


here is my last boot /var/log/messages

pcmcia: Starting PCMCIA services:
pcmcia:  modules
kernel: Linux PCMCIA Card Services 3.1.13 
kernel:   kernel build: 2.2.5-15 #1 Mon Apr 19 23:00:46 EDT 1999 
kernel:   options:  [pci] [cardbus] [apm] 
kernel: PCI routing table version 1.0 at 0xfdf50 
kernel:   00:04.0 -> irq 11 
kernel:   00:04.1 -> irq 11 
kernel: Intel PCIC probe:  
TI 1225 PCI-to-CardBus at slot 00:04, mem 0x68000000 
kernel:     host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 32/34] 
kernel:     host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 35/37] 
kernel:     PCI irq 11 seems to be wedged! 
kernel:     PCI irq 11 test failed 
kernel:     ISA irqs (default) = 3 polling interval = 1000 ms 
pcmcia:  cardmgr.
rc: Starting pcmcia succeeded
cardmgr[334]: starting, version is 3.1.13
cardmgr[334]: watching 2 sockets
kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x1087 0x1400-0x14ff 
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
inet: inetd startup succeeded
kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5257 
cardmgr[334]: initializing socket 0
cardmgr[334]: socket 0: 3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL
cardmgr[334]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/cb_enabler.o'
cardmgr[334]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/3c575_cb.o'
kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
kernel: cs: cb_config(bus 32) 
kernel:   fn 0 bar 1: io 0x200-0x27f 
kernel:   fn 0 bar 2: mem 0xa0021000-0xa002107f 
kernel:   fn 0 bar 3: mem 0xa0020000-0xa002007f 
kernel:   fn 0 rom: mem 0xa0000000-0xa001ffff 
kernel: vortex_attach(bus 32, function 0, device 5257) 
kernel: eth0: 3Com 3CCFE575CT Cyclone CardBus at 0x200,  00:50:da:55:27:2d, IRQ 3 
kernel: eth0: CardBus functions mapped a0020000->c8849000 
kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface. 
kernel:   MII transceiver found at address 0, status 7809. 
kernel:   Enabling bus-master transmits and whole-frame receives. 
cardmgr[334]: executing: './network start eth0'
lpd: lpd startup succeeded
keytable: Loading keymap: 
cardmgr[334]: + ioctl: Operation not supported

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

Add Message to: "kernel: eth0: transmit timed out, tx_status 00 status e000."

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10