Next-in-Thread Next Message

Sad eth0:interrupt(s) dropped! 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Mar 31
From: Ray jxray

/etc/sysconfig/pcmcia PCMCIA=yes PCIC=i82365 PCIC_OPTS="do_scan=0" #this dose not work for me. CORE_OPTS=

#cardctl ident
Socket 0:
  product info: "PCMCIA", "100BASE"
  manfid: 0xffff, 0x1090
  function: 6 (network)
Socket 1:
  no product info available

no other devices was using the irq my card was using. i tried all irqs which can be used, but get the same massage.

i think pcmcia-cs-3.1.13 can not support my poor card...

this card works perfectly in windoz using 0x320 irq 10

can any body help? thanX.

Next-in-Thread Next Message

Select this message: eth0:interrupt(s) dropped!

Messages Inline: 1 All Outline: 1 2 All

1. None So give us a hint: what brand and model of card is this? by David Hinds, 2000, Mar 31
(_ Feedback laplop manufactured in China. & my config files by Ray, 2000, Apr 01
(_ None I'm afraid you are out of luck for now by David Hinds, 2000, Apr 03
(_ Ok I'll be waiting for your new drivers...:) by Ray, 2000, Apr 04

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]