Re: Question: D-Link DFE-660 Problems 

Forum: PCMCIA Network Adapter Issues
Re: D-Link DFE-660 Problems
Date: 1999, Nov 15
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Try the following: -- build the 3.1.4 drivers with "PnP BIOS support" enabled. -- In /etc/sysconfig/pcmcia, set: PCIC_OPTS="pci_int=1 pci_csc=1" -- Dave

Messages Inline:

It works! Great! Re: Re: Question: D-Link DFE-660 Problems (David Hinds) Date: 1999, Nov 16 From: <mike@enoch.org>

Thanks David! It works now! Out of curioisity, what did those options do? In the HOWTO, I only saw mention of pci_csc. The HOWTO says that using "pci_csc=1" selects a PCI interrupt (if available) for card status change. Is this selecting interrupt 1, or setting a flag that tells the PCMCIA driver to select a PCI interrupt? And what does pci_int=1 do? I couldn't find any documentation on it. Thanks, Mike

They're documented in the man page Re: It works! Great! Date: 1999, Nov 16 From: David Hinds <dhinds@pcmcia.sourceforge.org>

See "man i82365" for a description of each of the options. -- Dave

Re: They're documented in the man page Re: They're documented in the man page (David Hinds) Date: 1999, Nov 16 From: Mike Johnson <mike@enoch.org>

On Mon, 15 Nov 1999, David Hinds wrote: > If you reply to this message at HyperNews@pcmcia.sourceforge.org, include: > In-Reply-To: <19991115180809.A17751@valinux.com> > > See "man i82365" for a description of each of the options. Gotchya. Thanks. Reading now. > -- Dave Mike

to: "Re: Question: D-Link DFE-660 Problems"