[ Next-in-Thread ]  [ Next Message ] 

Re: Question: D-Link DFE-660 Problems 

Forum: PCMCIA Network Adapter Issues
Re: Question: D-Link DFE-660 Problems
Date: 1999, Nov 15
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Try the following:

-- build the 3.1.4 drivers with "PnP BIOS support" enabled.
-- In /etc/sysconfig/pcmcia, set:

   PCIC_OPTS="pci_int=1 pci_csc=1"

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

It works! Great!

Re: Re: Question: D-Link DFE-660 Problems (David Hinds)
Date: 1999, Nov 16
From: <mike@enoch.org>

Thanks David! It works now!

Out of curioisity, what did those options do? In the HOWTO, I only saw mention of pci_csc. The HOWTO says that using "pci_csc=1" selects a PCI interrupt (if available) for card status change. Is this selecting interrupt 1, or setting a flag that tells the PCMCIA driver to select a PCI interrupt? And what does pci_int=1 do? I couldn't find any documentation on it.

Thanks, Mike

They're documented in the man page

Re: It works! Great!
Date: 1999, Nov 16
From: David Hinds <dhinds@pcmcia.sourceforge.org>

See "man i82365" for a description of each of the options.

-- Dave

Re: They're documented in the man page

Re: They're documented in the man page (David Hinds)
Date: 1999, Nov 16
From: Mike Johnson <mike@enoch.org>

On Mon, 15 Nov 1999, David Hinds wrote:

> If you reply to this message at HyperNews@pcmcia.sourceforge.org, include:
> In-Reply-To: <19991115180809.A17751@valinux.com>
> 
> See "man i82365" for a description of each of the options.

Gotchya.  Thanks.  Reading now.
 
> -- Dave

Mike
Re: Question: D-Link DFE-660 Problems


[ Add Message ]  to: "Re: Question: D-Link DFE-660 Problems"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]