Re: Question: D-Link DFE-660 Problems 

Forum: PCMCIA Network Adapter Issues
Re: Question: D-Link DFE-660 Problems
Date: 1999, Nov 15
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Try the following: -- build the 3.1.4 drivers with "PnP BIOS support" enabled. -- In /etc/sysconfig/pcmcia, set: PCIC_OPTS="pci_int=1 pci_csc=1" -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

It works! Great! Re: Re: Question: D-Link DFE-660 Problems (David Hinds) Date: 1999, Nov 16 From: <mike@enoch.org>

Thanks David! It works now! Out of curioisity, what did those options do? In the HOWTO, I only saw mention of pci_csc. The HOWTO says that using "pci_csc=1" selects a PCI interrupt (if available) for card status change. Is this selecting interrupt 1, or setting a flag that tells the PCMCIA driver to select a PCI interrupt? And what does pci_int=1 do? I couldn't find any documentation on it. Thanks, Mike

1. They're documented in the man page by David Hinds, 1999, Nov 16 (_ Re: They're documented in the man page by Mike Johnson, 1999, Nov 16

[ Add Message ]  to: "Re: Question: D-Link DFE-660 Problems"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]