|
I have the following problem with the D-Link DFE-660TX-Card:
When I use the auto-negotiation of this card, the link is established, the half/full-duplex-led is in the beginning off, just when I transfer data the led starts to pulse. The switch is 100mbit-FD and there the half/full-duplex-led is not pulsing. mii-diag says, the card is on auto-negotiation and the switch advertised 100baseTx-FD 100baseTx 19BaseT-FD and 10baseT. When I set manually the card to option 14 of the tulip-driver (MII-100baseTx-FD) the link is not established and nothing happens (the mii-diag says: link was firstly broken, but now reestablished). Yes, I´ve changed the PCIC_OPTS to "pci_int=1 pci_csc=1" ;)
The laptop is an ibm-thinkpad 4187 with the O2Micro OZ6812 (rev 5) Cardbus-Controller. With windows the full-duplex is automatically set, nothing pulses and everything is going fine there (but its not my preferred OS). Or is there somewhere a tool, where I can turn off the autonegotiation by default and force it to 100BaseTx-Fd (I did not found anything to setup at dlinks webpage, just diagnostic tools) ? If anyone needs more debug-info or has THE idea, please write. regards christian
|
Messages