[ Next-in-Thread ]  [ Next Message ] 

Another view on this problem 

Forum: PCMCIA Network Adapter Issues
Re: Question: Destination Host Unreachable (David Walden)
Re: Network unreachable == routing problem (David Hinds)
Re: RE: Network unreachable == routing problem (David Walden)
Date: 2000, Jan 05
From: John Jervis JohnJ

I don't agree that "network unreachable" is *always* due to routing problems, though this is the common reason. My Olicom GoCard multifunction eth/modem card gives this, but /var/log/messages shows the following when pinging an external address (i.e. not itself):

<date> <node> kernel: eth0: timeout waiting for Tx RDC.
<date> <node> kernel: eth0: pcnet_reset_8390() did not complete

and repeats this ad infinitum.

Is this why the Olicom card is no longer in the latest list of supported cards?

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Another view on this problem

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]