O2Micro OZ6836: Extremly slow Ethernet-Card

Forum: PCMCIA Network Adapter Issues
Date: 2000, May 31
From: Dag Kröper dagkro

Hi! Can everyone help me ???? I've a problem with my Ethernet-Card. The card will be recognized correctly, but it has a very slow Data-Transfer (about 10 KBytes/sec) Infos (about my laptop) (I hope they are sufficient): CPU: Mobile-Pentium II 333 MHz Chip-Set: Intel MX RAM: 64 MB HDD: 4,5 GB Fujitsu Card-Bus-Controller: O2Micro OZ6836 Ethernet-Card: Longshine LS 8534 TB-A1 10base2 or 10baseT cardctl config: ================ Socket 0: not configured Socket 1: Vcc 5.0V Vpp1 0.0V Vpp2 0.0V interface type is "memory and I/O" irq 10 [exclusive] [level] function 0: config base 0x0fd0 option 0x41 status 0x00 copy 0x00 io 0x0300-0x031f [auto] cardctl ident ============= Socket 0: no product info available Socket 1: product info: "Ethernet", "Adapter", "2.0" manfid: 0x0149, 0xc1ab function: 6 (network) dmesg: ====== Linux PCMCIA Card Services 3.1.15 kernel build: 2.2.15 #4 Tue May 30 15:37:59 MEST 2000 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfdf00 00:03.0 -> irq 11 00:03.1 -> irq 11 Intel PCIC probe: O2Micro OZ6836/60 rev 62 PCI-to-CardBus at slot 00:03, mem 0xe1000000 host opts [0]: [ring] [pci/way] [pci irq 11] [lat 32/176] [bus 32/34] host opts [1]: [ring] [pci/way] [pci irq 11] [lat 32/176] [bus 35/37] ISA irqs (default) = 3,4,7,9,10,12 PCI status changes cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x408-0x40f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff eth0: NE2000 Compatible: io 0x300, irq 10, hw_addr 00:E0:98:7B:D2:A3

Select this message: O2Micro OZ6836: Extremly slow Ethernet-Card

Messages Inline: Outline:

1. The messages look good by David Hinds, 2000, May 31: 1. Re: The messages look good by Dag Kröper, 2000, Jun 02

2. Solve Problem :-) by Dag Kröper, 2000, Jul 10

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Edit This Forum ]