Next-in-Thread Next Message

Feedback Corega 10M EtherII PCC-T failed detection  

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jun 03
From: Michael Fitzpatrick leahcim

I bought a Corega 10M PCMCIA PCC-T card @ Linux Expo 2000.

Plugged it in and got an Oops from CardMgr loading tulip_cb drivers.

Turns out this card isn't in the config file (only a slight difference in version info from another Corega card though)

Biggest problem is the manuf ID it reports clashes with another card in the database.

It was trivial for me to add an entry for this card (it uses pcnet_cs like the other Corega cards already defined) and comment out the clashing card, and once that's done the card works without problems.

Info returned from cardctl ident for Corega :-

Socket 1:
  product info: "corega K.K.", "corega EtherII PCC-T"
  manfid: 0xc00f, 0x0000
  function: 6 (network)

config entry for manfid clash :-

#card "Allied Telesyn AT-2800 10/100 Fast Ethernet"
# manfid 0xc00f, 0x0000
# bind "tulip_cb"

Entry I added to config :-

card "Corega PCC-T EtherII"
  version "corega K.K.", "corega EtherII PCC-T"
  bind "pcnet_cs"

Next-in-Thread Next Message

Select this message: Corega 10M EtherII PCC-T failed detection

Messages Inline: 1 All Outline: 2 3 All

1. None Apologies by Michael Fitzpatrick, 2000, Jun 03

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]