Next-in-Thread Next Message

Sad Again: eth0: interrupt(s) dropped! 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jun 26
From: Michael Brandt michab

hi,

i just installed linux (suse64) on my laptop using pcmcia 3.1.17. eth0 is set up correcty via dhcp but i'm getting these messages:

kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0.
last message repeated 3 times
kernel: eth0: interrupt(s) dropped!

additionaly i'm not able to build up an connection....

under win irq_11 is assigned to my graphiccard, irq_10 seem to be free..

how can i fix this ?? any ideas ??

thx,
micha

some settings & messages:
---------------------------------

PCIC=i82365
PCIC_OPTS="pci_int=1 pci_irq_list=11 irq_list=10"


config:
---------
Socket 0:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 10 [exclusive] [level]
  function 0:
    config base 0x03c0
      option 0x47 status 0x00
    io 0x0300-0x031f [auto]
Socket 1:
  not configured

ident:
---------
Socket 0:
  product info: "PCMCIA", "FAST ETHERNET CARD"
  manfid: 0xffff, 0x1090
  function: 6 (network)
Socket 1:
  no product info available

status:
----------
Socket 0:
  5V 16-bit PC Card
  function 0: [ready]
Socket 1:
  no card

messages:
-----------
kernel: Linux PCMCIA Card Services 3.1.17
kernel:   kernel build: 2.2.14 #1 Mon Mar 13 10:54:26 GMT 2000
kernel:   options:  [pci] [cardbus] [apm]
kernel: PCI routing table version 1.0 at 0xfdf80
kernel: Intel PCIC probe: 
kernel:   O2Micro OZ6832/33 rev 34 PCI-to-CardBus at slot 00:0a, mem 0x68000000
kernel:     host opts [0]: [ring] [pci/way] [pci irq 11] [lat 168/176] [bus 32/34]
kernel:     host opts [1]: [ring] [pci/way] [no pci irq] [lat 168/176] [bus 35/37]
kernel:     PCI irq 11 test failed
kernel:     ISA irqs (default) = 10 polling interval = 1000 ms
cardmgr[253]: starting, version is 3.1.17
cardmgr[253]: watching 2 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
kernel: cs: IO port probe 0x0800-0x08ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x398-0x39f 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[253]: initializing socket 0
kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
cardmgr[253]: socket 0: NE2000 Compatible Fast Ethernet
cardmgr[253]: executing: 'modprobe 8390'
cardmgr[253]: executing: 'modprobe pcnet_cs mem_speed=600 hw_addr=0x00,0x50,0x22,0xF2,0x1D,0x58'
kernel: pcnet_cs: sorry, the AX88190 chipset is not supported.
kernel: eth0: NE2000 Compatible: io 0x300, irq 10, hw_addr 00:50:22:F2:1D:58
cardmgr[253]: executing: './network start eth0'
kernel: eth0: interrupt from stopped card
kernel: eth0: interrupt(s) dropped!
kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0.
last message repeated 3 times
kernel: eth0: interrupt(s) dropped!

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None This network chipset isn't supported for the moment by David Hinds, 2000, Jul 05

Add Message to: "Again: eth0: interrupt(s) dropped!"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10