Next-in-Thread Next Message

None That message is not an error 

Forum: PCMCIA Network Adapter Issues
Re: Question No such file or directory? (John Cusick)
Re: None Update the PCMCIA init script... (David Hinds)
Re: Feedback Readonly Variable? (John Cusick)
Date: 2000, Jul 06
From: David Hinds <dhinds@pcmcia.sourceforge.org>

>   /sbin/init.d/rc2.d/S03pcmcia: SCHEME: readonly variable

This is not a failure message.  It is perhaps misleading, but it is
just telling you that you've overridden SCHEME from the boot prompt.

Is this the only PCMCIA message you got?

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 1

Feedback Other message is "failed services"

Re: None That message is not an error (David Hinds)
Date: 2000, Jul 06
From: John Cusick <zen@sprynet.com>

Dave,

Yes, that's the only message other than the failed services message:

  Failed services in runlevel 2: pcmcia

Strange, the pcmcia services started fine with the older script, the card was recognized and the "driver" was loaded, just the scheme wasn't recognized. Now, for some reason, the services don't even start.

Note Intel CardBus 32 Works!

Re: Feedback Other message is "failed services" (John Cusick)
Date: 2000, Jul 07
From: John Cusick <zen@sprynet.com>

After some tweaking, I found the following were necessary to get the Intel CardBus card working at 100bT half-duplex:

1) Moved /etc/rc.d/init.d/pcmcia.N to /etc/rc.d/init.d/pcmcia

2) Remarked out "SCHEME=" from etc/rc.d/init.d/pcmcia

3) Forced the card's media type to 100bT half-duplex by adding the following to /etc/pcmcia/config.opts:

	module "tulip_cb" opts "options=3"

That message is not an error


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]